|
tjcooper 02-12-2005, 06:26 PM I bought some FX6-H speakers for the rear. I am not mechanicaly inclined at all. Can someone give me some tips/instructions for installting them? For example. How do I remove the door panel? box-E 02-12-2005, 06:41 PM no need to remove the whole door pannel just the speaker grill comes off. I just grab it on one side and pull. they come off real easy. you should be just fine doing the upgrade, 10 min. per side. good luck drew Jeffm624 02-12-2005, 07:12 PM This site might help ya out http://www.re-vision.com/element-j/ bigjus 02-12-2005, 07:35 PM since you said you're not mechanically inclined you may want to run to your local car stereo shop/big box electronics shop and get some honda factory speaker harnesses. the rears are easy to swap, you should be done in 30 minutes or so. good luck! tjcooper 02-12-2005, 10:38 PM I am not mechanicaly inclined, but I am very good at soldering and electronics (been doing it in some form for 15 years now). I was just going to put some quickconnect ends on the new speakers to match whatever is on the stock speakers, or if there are no connects, add them to both ends. | ||