Ok, new issue

I installed a 4-8 Ohm DVD receiver and bought Infinity 6022i speakers.

Problem is that the speakers are 2 Ohm and are silent.

I tried wiring them in series on the rear channel (in hopes I could use the front channel for tweets)

HU Rear Left(+) to Rear left speaker(+)
Rear left speaker (-) to Front left speaker(+)
Front left speaker (-) to HU Rear Left (-)

Well, it doesn't work...

1. How can I fix this without an amp (and ton of wiring/rca's)?

2. I do have a RF2002 2-channel. Can I connect both the front+rear (left/right respective) together on the amp?


Thanks!

Derrick


P.S. I found a sweet spot under the console to run the 4 AWG from the battery (most of you know this already). Just follow the shifter down and zip-tie your heart out. No Drilling required!

It would help if you'd fill out your user information (05 awd ex) etc.

It would help if you'd fill out your user information (05 awd ex) etc.

Done


and fixed. I wired them back the way they should be, and put a 25watt, 2ohm resistor in series with each speaker (I have them at work). They are ear piercingly loud...and clear.