Hey there guys,I'm in the process of finishing up the remote starter/two way security system install on my E,and in order for me to get the drivers priority lock feature to work,the units install manual says I need to connect it's (-)500mA output wire to a relay to unlock the passenger door,when system is configured for drivers priority unlocking.My question is,does anyone know where the easiest/best location I could find to trigger only the passengers door unlock with my negatively triggered relay.Also since the factory keyless entry has the drivers priority feature,can I simply find this wire in the green factory keyless entry plug,or will I need to tap into the wires elsewhere?

Thanks :)

Eww, maybe this (http://www.skidmore.edu/~pdwyer/e/passenger_door_lock.htm) will be of some value.
...trigger only the passengers door unlock with my negatively triggered relay.
Your relay may be energized by grounding, but note that the lock solenoids themselves are positive-actuated.

Eww, maybe this (http://www.skidmore.edu/~pdwyer/e/passenger_door_lock.htm) will be of some value.

The relay's coil may be energized by grounding, but note that the lock solenoids themselves are positive-actuated.

Thanks alot:) I think that will be of some help.

That's a nice job you've done to your E and your web page.:cool:

Well I got it wired in correctly,I ended up having to just five wire a relay into the yellow/green wire,feeding to the drivers door unlock motor wire.It was actually quite easy.:)
Thanks.:cool: