OEM Fog Light switch wiring harness, I got a few key ideas here in the forum for building a solid harness connection for the OEM Fog light switch. It cost me $7.00 to make and I will do the same for anyone who'e interested.

OEM Fog Light switch, 5 pin connector:
Five different color wires connected by pins and crimped to the wire. Will also supply heat shrink. All wires will be six inches long and all you would have to do is press onto OEM switch pins and then use a lighter to shrink heat wrap. This is a very tight fit and will not pull off, please note that I trimmed away the plastic that surrounds the pins. This was done to get at the heat shrink wrapping, otherwise it's shrouded by the factory wiring harness support. Not sure how to add pictures here, if interested just email me and I will send pics your way. :D

you can also use the power supply plug from an AT computer power supply it is 6 pin but you just slice one off and it fits perfect

Here's a pic of the FREE information and FREE WIRING HARNESS.
Pretty snug fit.

http://members.cox.net/john.grady/photogallery/fogswitch1.JPG

http://members.cox.net/john.grady/photogallery/wireharness.JPG

John

i agree with 1kewl...

check this thread out for wiring info:

http://www.elementownersclub.com/forums/viewtopic.php?t=4409&postdays=0&postorder=asc&start=15

OK I bought the OEM switch today what route should I take? Computer power supply cable of ???

I payed my local recycling yard "junk yard" a visit and the owner let me walk around the yard.
While there I pulled some five and six pin plugs from a variety of Honda and acura vehicles. I made sure to clip at least 3 to 4 inches of wire length.
The plugs look like the will fit the oem switch which I should have monday the 10th.
I'll post photos and instructions on my page when I'm done.
:idea: :idea:

Other than that... enjoying the lunar eclispe and life beyond my walls. :roll:

i went to a local computer repair shop and asked the guy if he had any junk power supplies and bingo
ive got an extra if anyone needs just message me

Honda plugs from an old car have the same size pins for the oem switch.
I found a five prong switch and only had to trim the edges . Perfect fit.
I also used extra for the harness hook up " at the fuse box" my fogs double up as daylight driving lights too.
in addition I used the Elements oem harness to plug the fogs into.
see my www page or additional threads under cyber whites. install I and II

I have one extra five pin plug and the original lighted switch that came with the fogs. anyone want's it let me know I'll throw it in the mail.


In the meantime... Ejoy life beyond your doors... :idea:

http://www.cardomain.com/member_pages/view_page.pl?page_id=457945&cat=5&val=1