Hey do you guys know what offset i can run on an E with the TE37s slammed on tein basic coilovers?

You're not going to get very concave on an element. You'll max out at about +40.

You're not going to get very concave on an element. You'll max out at about +40.

So is anyone on this forum running aggresive offsets? If so, I would like to see some pictures. Im trying see what I can stir up for a setup.:grin:

So is anyone on this forum running aggresive offsets? If so, I would like to see some pictures. Im trying see what I can stir up for a setup.:grin:

As most aggressive is someone doing 20x10 + 35's F/R, but he's not even dropped!

First of all WELCOME to the EOC! Please fill out your profile, which helps us, help you. If you wish to slam it, you will have to either cut out the rear inside fenders or they will have to be rolled. Then you can run lower off-sets and still be able to get as low as you desire. You will also need a Rear Camber Kit and Front Camber Bolts to properly align it after you've lowered it.

Chief

First of all WELCOME to the EOC! Please fill out your profile, which helps us, help you. If you wish to slam it, you will have to either cut out the rear inside fenders or they will have to be rolled. Then you can run lower off-sets and still be able to get as low as you desire. You will also need a Rear Camber Kit and Front Camber Bolts to properly align it after you've lowered it.

Chief


yea I understand, just wanted to see if there were any others around running aggresive offsets... Im not a big fan of 20" wheels due to the cost and size of the rim itself. Reason i havent filled out my profile is because Im not an E owner quite yet, still in the process of getting rid of my S2000 so I can purchase the E:D Im familiar with having a slammed vehicle (camber kits, rolled fenders, etc...).

Because the element has plastic fenders, you have to get a little more creative when you want to tuck. (ie a dremel!)

Because the element has plastic fenders, you have to get a little more creative when you want to tuck. (ie a dremel!)

Does the SC have plastic fenders also? I don't plan on tucking to much, just enough to tuck a portion of a 40 series tire.

Does the SC have plastic fenders also? I don't plan on tucking to much, just enough to tuck a portion of a 40 series tire.

Yes. Painted plastic.