Will 16" wheels from either a Honda Odyssey or Honda Accord V6 fit the element with out problems. Also will the Element DX lug nuts work with these or are different lugs needed.

Any 5 lug from Honda or Acura should work. I really like the RSX alloys. Not sure about the lugs.

Pilot rims should have a fairly close off set to the Element rims.

I'm just about ready to put Acura MDX 17" wheels on mine. :mrgreen:

I've revived this thread in hopes that someone can tell me if 2003 Odyssey wheels will work on my 2007 E. Here are the specs below. I'm assuming they will fit (have a little concern about the offset), but I do wonder about the TPMS. Can the monitors from my stock wheels be swtiched over to work on 2003 wheels?

Rim Width: 6.5J
Rim Diameter (inches): 16
Offset: 50
Number of Bolts: 5
Bolt Pattern: 5 x 4.50 or 5 x 114.3
Rim Brand: Factory, OEM
Rim Structure: One Piece
Manufacturer Part Number: 42700S0XA81

I've revived this thread in hopes that someone can tell me if 2003 Odyssey wheels will work on my 2007 E. Here are the specs below. I'm assuming they will fit (have a little concern about the offset), but I do wonder about the TPMS. Can the monitors from my stock wheels be swtiched over to work on 2003 wheels?

Rim Width: 6.5J
Rim Diameter (inches): 16
Offset: 50
Number of Bolts: 5
Bolt Pattern: 5 x 4.50 or 5 x 114.3
Rim Brand: Factory, OEM
Rim Structure: One Piece
Manufacturer Part Number: 42700S0XA81


Rim width and off set shouldn't be a problem and don't see a problem with mounting your sensors on the Oddy wheels.The big difference between TPMS rims and regular rims is that Honda says the TPMS rims are counter balanced to make up for the extra weight of the sensors.

ive put honda tmps stems on non tpms rims, theyll fit and the weight difference isnt much anyway, but use new valve stems because theres a crush washer inside