:?: are the tweeters hooked up to the right and left, positive and negative, front speakers respectively. my questions are in regard to the double wire on the left front speaker and single on the right front. please reply if you can help.

in advance, thank you.

Eddel Veloso

Huh? :shock:

Wiring diagram shows two to both:

Left - light blue, and gray with blue tracer

Right - green with yellow tracer, and gray with red tracer


So... what do you mean by "double wire"?

the info i gathered...at the stock EX amp

front left positive green with black (yeah green w/ black)
front left negative green

front right positive green with yellow
front right negative blue with yellow

rear left positive blue with white
rear left negative blue with black

rear right positive pink
rear right negative blue yellow

yeah at the left front 6 1/2's (not the tweeter) i have a double green and black and a double green. on the right front, just singles. i cut the wires on my factory amp and hooked my pioneer 7600's speaker outputs to them. i just wanted to make sure i'm hooking everything up right.

[quote:0c0bb30c7c=" "]Huh? :shock:

Wiring diagram shows two to both:

Left - light blue, and gray with blue tracer

Right - green with yellow tracer, and gray with red tracer


So... what do you mean by "double wire"?[/quote:0c0bb30c7c]


hmm....i think i'll go out on a limb here:

I believe MikeQBF is referring to the speaker-level outputs from the STOCK HU that go to the stock amp.

On the other hand, Eveloso is referring to the speaker wire outputs from the STOCK AMP...i.e. that go away from the stock amp.

I'll have to take another lookie tomorrow night...i'll edit this post if I find the right answers.

And yeah, what's up with the front left speaker wiring have a duplicate set of green/black and green wires? I'm guessing series wiring to the tweeters, but if so, then how come the right side speakers only have a single set of wires then? weird.

thank you "SCREWaerodynamics!"

any help would be greatly appreciated.

OK...
I spent the last 4 hours removing most of the wiring from my system in preparation to re-wire everything from the HU to the amp to the speakers.

With regards to SPEAKER OUTPUTS away from the amp, the color codes are definitely:

front left (+) = green w/ black tracer <6>
front left (-) = green <13>

front right (+) = green w/ yellow tracer <7>
front right (-) = blue w/ yellow tracer <14>

the number enclosed in <...> refer to the position of the wire on the large gray plug connected to the stock amp. while looking at the plug with the small lever (the one that you press to remove it) on the topside, position 1 starts from the top left corner and position 6 is top right corner. And lower left corner is subsequently 7 and the opposite corner is 14.

with regards to SPEAKER-LEVEL INPUTS coming from the stock HU to the stock AMP, I have realized I have absolutely NO CLUE. There are no gray wires with red or blue tracers anywhere. However, it is my understanding that the green plug going into the stock amp are the speaker-level inputs coming from the stock HU.

Can someone PLEASE tell us the color coding of the wires that come from the stock HU and connect to the stock AMP?