Brockoli Light Bar and Lights - Page 4

alexpopinski · 03-06-2011, 09:58 PM

Quote:

Originally Posted by erickang411

Alexpopinski... can you put the winch on the front...I was looking at your preliminary drawing and I noticed one?

i dont think itd be possible just because of the frame, and how its built. the power of the winch might bend the frame

GearStudios · 11-10-2011, 02:16 PM

Love the look of the E!! How and where did they wire the switch for the lights? Do you have a pic?

badgerx · 12-09-2011, 11:11 AM

What is the ordering process? I've got to have one for my '08?

alexpopinski · 12-04-2012, 12:08 PM

Quote:

Originally Posted by GearStudios

Love the look of the E!! How and where did they wire the switch for the lights? Do you have a pic?

They drilled a pretty big hole through the firewall but the two swithes are moutn on that little plastic piece below the change pocket to the right of the steering wheel

murso74 · 12-04-2012, 04:00 PM

what does the bar mount to? radiator mounts?

Silvermannn · 12-04-2012, 07:19 PM

Looks good so far... I hope you make quick progress!

alexpopinski · 12-10-2012, 10:18 PM

Quote:

Originally Posted by murso74

what does the bar mount to? radiator mounts?

There are two horns that stick out which are partof the subframe that have some holes already in them. 4 bolts anchor the bar inbetween them

murso74 · 12-11-2012, 03:00 PM

so its more secure then the brush bars? if so i'd deff picking one up

chuckc1971 · 12-11-2012, 05:52 PM

I have this bar and I have one suggestion and it's a good one: for the attachment between the cross bar and the two "horns", I would advise two bolts per side vs. just the one. Even with very large fender washers, my lights "bounce" when hitting any minor road chatter. The sacrifice in adjustability would be worth it to me.

alexpopinski · 12-12-2012, 01:45 AM

yea definitely more stable than the brush bars

heres a sweet picture I took of mine with the lights on, I also have some videos up on youtube of random Element things if you search my username "apopbm"

12-09-2011, 11:11 AM	#33
badgerx EOC Rank: Hydrogen 2008 4WD EXS AT Galaxy Gray Metallic (GG) Join Date: Mar 2008 Location: Lafayette, LA Posts: 4	I want one! What is the ordering process? I've got to have one for my '08?

12-04-2012, 04:00 PM	#35
murso74 EOC Rank: Oxygen 2008 4WD LX AT Tangerine Metallic (TM) Join Date: Aug 2011 Location: queens, ny Posts: 662	what does the bar mount to? radiator mounts? __________________ EX conversion checklist: 2010 cooler console: done. storage armrest: done. sun visor with mirrors: done. rear aux outlet: done. overhead console: ordered. sound system upgrade: aftermarket. center console sub: done

12-11-2012, 03:00 PM	#38
murso74 EOC Rank: Oxygen 2008 4WD LX AT Tangerine Metallic (TM) Join Date: Aug 2011 Location: queens, ny Posts: 662	so its more secure then the brush bars? if so i'd deff picking one up __________________ EX conversion checklist: 2010 cooler console: done. storage armrest: done. sun visor with mirrors: done. rear aux outlet: done. overhead console: ordered. sound system upgrade: aftermarket. center console sub: done

12-11-2012, 05:52 PM	#39
chuckc1971 EOC Rank: Oxygen 2008 4WD EX 5AT Tango Red Pearl (TRP) Join Date: Mar 2010 Location: Louisville, KY Posts: 338	I have this bar and I have one suggestion and it's a good one: for the attachment between the cross bar and the two "horns", I would advise two bolts per side vs. just the one. Even with very large fender washers, my lights "bounce" when hitting any minor road chatter. The sacrifice in adjustability would be worth it to me. __________________ OEM splash guards/sidesteps/storage arm rest, Weather Tech visors, AVS Bugflector II, Brockoli bar/Hella Dynaview lights, U-haul hitch, hitch safe, Injen/Flowmaster SS exhaust, Injen CAI, EBC rotors/Hawk pads, 235x70 Michelin A/T2s, front window tint, Shen's turn signal mod, 1-click>all unlock, cleared lights/markers, Osram H4 65/70w headlights, both domes together, full Elemmat kit, Panavise GPS mount, Ultimate Cupholder, Ursa Minor dead pedal, mucho LEDS + Plasti-dip.

12-12-2012, 01:45 AM	#40
alexpopinski EOC Rank: Hydrogen 2005 4WD EX AT Magnesium Metallic (MM) Join Date: Mar 2010 Location: Asheboro, NC Posts: 78	yea definitely more stable than the brush bars heres a sweet picture I took of mine with the lights on, I also have some videos up on youtube of random Element things if you search my username "apopbm" Attached Images

11-10-2011, 02:16 PM	#32
GearStudios EOC Rank: Hydrogen 2003 4WD EX AT Shoreline Mist Metallic (SMM) Join Date: Nov 2011 Location: Asheville, NC Posts: 2	Love the look of the E!! How and where did they wire the switch for the lights? Do you have a pic?

12-04-2012, 07:19 PM	#36
Silvermannn EOC Rank: Hydrogen 2005 4WD EX AT Sunset Orange Pearl (SOP) Join Date: Nov 2012 Location: Hartford, CT. Posts: 15	Looks good so far... I hope you make quick progress!

Remove Advertisements Sponsored Links
Element Owners Club Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bull Bar/Roof Lights	DiamondPlate703	Exterior	2	11-07-2010 02:38 PM
Light Bar?	Hoboken Knight	'E'ccessories	9	12-21-2008 12:47 PM
Aux Lights and Custom Light Bar	Ironfish653	Do-It-Yourself / Mods	17	10-24-2006 11:58 AM
Bull Bar or Light Bar	FMercik	'E'ccessories	1	04-15-2004 10:14 PM
light bar	boneheadz	'E'ccessories	3	02-19-2003 09:35 AM