Miss Daisy

[04EXE]

Originally Posted by k-series

Fixed that for you.. :)


E looks good, I know the guy that mounted the tires. I'm getting my wheels from him. :)


Steve

Florida is TOO hot in the summer.... That isn't awesome!!

[k-series]

Well, I know I never walk out on a hot summer day and think "DAMNIT, I have to scrape this heat off my windshield... " :P


Steve

[HOTBOX1208]

Originally Posted by Mistergou

what size specs you get??

Originally Posted by Jst2878

What's your normal ride height camber. What are your wheel specs. Spit it out lol
Really looks sweet with those colors. Congrats.

Do you guys know how long it took me to come up with my offset? It took a long time and I still did not get the rears right. My front is +36 and my rears are +27.

My ride height camber is in the neighborhood of -6 degrees, but I ride lower than what I had my car aligned at.

Originally Posted by Burn619

anyone can be as low as is possible

Miss Daisy is looking great, but I will give full props when she's on the ground.
To me, if you're on air you better be able to lay her all the way down.
That being said, your car looks amazing, makes me want t get back into mine. good stuff.

Originally Posted by Mistergou

out of the 3 elements on air (mine included) none are on the ground the element is not the easiest thing to get that low, a handful of custom fabrication would be needed

I have yet to make the trip back up to Tampa for more fabrication at my friends shop. The front strut can be threaded down further, however the cv axle will make contact with the chassis when I air out.(Needs to be notched)
For the rears, the struts are all the way down. I am not sure if the body is sitting on the tires or if the rear camber arms are preventing me from going lower...I have to find out. It could just be the design of the Airrex strut that won't go any lower. Also, I wanted a little meat on my wheels after bending my Meisters...I thought the 40 series on 19s would fill the gap nicely. I could've went with 35 series and that would of made me lower a little.

Originally Posted by k-series

E looks good, I know the guy that mounted the tires. I'm getting my wheels from him. :)


Steve

DT Performance did an awesome job mounting the tires. I would highly recommend them and will be going back pretty soon to flip my rears lol...kidding...hopefully I won't need to flip for at least 3 months

Originally Posted by Darth Raider

Rich (Miss Daisy) and I were talking about his about a year ago. He was toying with the idea to relocate the gas tank. That would definitely have to be considered if you want to go for the slammed effect. Get rid of the spare and have a fuel cell mounted in the rear tire space. This would automatically free up a lot of under carriage clearance.

Chief...I was looking under my E when my air was being installed. It looks like the gas tank, gas tank bar, muffler, resonator...all are on the same level as the part where the control arms mount to the chassis. What this means is even if you relocate the gas tank, you will still only be as low as this point. Therefore there is no point in relocating gas tank to be lower.


Thanks everyone for the love...Daisy and I truly appreciate it

[Darth Raider]

Originally Posted by HOTBOX1208

Chief...I was looking under my E when my air was being installed. It looks like the gas tank, gas tank bar, muffler, resonator...all are on the same level as the part where the control arms mount to the chassis. What this means is even if you relocate the gas tank, you will still only be as low as this point. Therefore there is no point in relocating gas tank to be lower.

Rich...thanks for the update my friend!

[HOTBOX1208]

A couple more....

[HOTBOX1208]

And a couple more....

[Darth Raider]

You always love when a "good thing' just gets better!!!

[misdirection11082]

now that your on air and have the new wheels are we going to get a new video?

[k-series]

So 19" Schwert SC2 in a custom bronze?


Steve

[HOTBOX1208]

Originally Posted by misdirection11082

now that your on air and have the new wheels are we going to get a new video?

It's in the works, however my friend that took the stills will be shooting and editing the video himself. I gave him full control of the video.

Originally Posted by k-series

So 19" Schwert SC2 in a custom bronze?


Steve

Yes, Matte Deep Black center with Glossy Anodized Step Lip.