Carbon fiber hood, LA local pick up $150

Rob Dobbs · 01-14-2013, 07:24 PM

Ive had this in my garage for the past couple years which means im never going to do anything with it. Was bought here from a forum member that had sanded the surface prior getting it ready for paint. Typical with these is the pointed ends will need a little patch work but nothing major or out of the ordinary.
This is a strait bolt on hood and NOT the cheap version that needs extra support work and mounts. The weight savings is significant as this can literally be picked up with two fingers. This was to go onto my prior 03 EX when the intention was to get custom work done to it, then sold it to pick up the current 07 SC. The hood should fit all years.

Im looking to get what I paid for it as is which is $150
Please PM me here on the board if your interested.

Im located off the 405 freeway and Inglewood ave exit about 5 minutes south of LAX, or if you dont drive like me up to 15 minutes south of LAX, near what used to be the TRW facility in the South Bay.

nvmyrd4 · 01-14-2013, 09:10 PM

Very interested. But would like to see pictures. In riverside off 91 and 14th street downtown

Rob Dobbs · 01-14-2013, 10:18 PM

Pic tomorrow when its daylight.

Rob Dobbs · 01-16-2013, 09:49 PM

Didnt get pics in daylight, sorry. Will get better ones asap. As stated the surface has been being prepped at one point for paint but paint has never been applied. It still needs the typical clean up on the edges and as mentioned the corners. Its sat where is as is since I bought it. Its a strait bolt on hood meaning it has internal reinforcements and a steel hood latch catch. Ive tried to catch those bits but the hood needs a good cleaning. All in all is a finer hood than the $800 carbon fiber hood that was on my prior PT Loozer.

My intention was to paint it body color with the center indentation being matte blck and fill in the windshield washer jet holes.

Rob Dobbs · 01-22-2013, 11:29 PM

Links to daylight pics.

http://i50.tinypic.com/2z8ujpe.jpg
http://i46.tinypic.com/wsn11j.jpg
http://i50.tinypic.com/wqy6x4.jpg
http://i47.tinypic.com/208v2h3.jpg
http://i49.tinypic.com/dg6ofm.jpg
http://i46.tinypic.com/dlhlps.jpg
http://i47.tinypic.com/2yjo9li.jpg

Rob Dobbs · 03-14-2013, 07:48 PM

still available.

01-14-2013, 07:24 PM	#1
Rob Dobbs EOC Rank: Carbon 2007 SC 2WD 5AT Nighthawk Black Pearl (NBP) Join Date: Oct 2010 Location: So Cal Posts: 1,086	Carbon fiber hood, LA local pick up $150 Ive had this in my garage for the past couple years which means im never going to do anything with it. Was bought here from a forum member that had sanded the surface prior getting it ready for paint. Typical with these is the pointed ends will need a little patch work but nothing major or out of the ordinary. This is a strait bolt on hood and NOT the cheap version that needs extra support work and mounts. The weight savings is significant as this can literally be picked up with two fingers. This was to go onto my prior 03 EX when the intention was to get custom work done to it, then sold it to pick up the current 07 SC. The hood should fit all years. Im looking to get what I paid for it as is which is $150 Please PM me here on the board if your interested. Im located off the 405 freeway and Inglewood ave exit about 5 minutes south of LAX, or if you dont drive like me up to 15 minutes south of LAX, near what used to be the TRW facility in the South Bay.

01-14-2013, 09:10 PM	#2
nvmyrd4 EOC Rank: Hydrogen 2007 SC 2WD 5AT Root Beer Metallic (RBM) Join Date: Jul 2012 Location: southern california Posts: 43	Very interested. But would like to see pictures. In riverside off 91 and 14th street downtown __________________ enewbie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: used VIS Carbon fiber hood	fatfurious2	Trading Post	28	10-28-2010 07:32 AM
Carbon Fiber Hood	Nightmare	Exterior	24	04-08-2010 03:31 AM
Carbon Fiber Hood?	L-EH-MENT	Exterior	29	07-05-2007 01:18 PM
Anyone want to buy a carbon fiber hood? for 350$	mc02uk2002	Trading Post	28	04-11-2007 12:45 PM
Carbon fiber hood on E-bay	mini E	Exterior	16	09-21-2004 04:16 PM

01-14-2013, 10:18 PM	#3
Rob Dobbs EOC Rank: Carbon 2007 SC 2WD 5AT Nighthawk Black Pearl (NBP) Join Date: Oct 2010 Location: So Cal Posts: 1,086	Pic tomorrow when its daylight.

01-16-2013, 09:49 PM	#4
Rob Dobbs EOC Rank: Carbon 2007 SC 2WD 5AT Nighthawk Black Pearl (NBP) Join Date: Oct 2010 Location: So Cal Posts: 1,086	Didnt get pics in daylight, sorry. Will get better ones asap. As stated the surface has been being prepped at one point for paint but paint has never been applied. It still needs the typical clean up on the edges and as mentioned the corners. Its sat where is as is since I bought it. Its a strait bolt on hood meaning it has internal reinforcements and a steel hood latch catch. Ive tried to catch those bits but the hood needs a good cleaning. All in all is a finer hood than the $800 carbon fiber hood that was on my prior PT Loozer. My intention was to paint it body color with the center indentation being matte blck and fill in the windshield washer jet holes.

01-22-2013, 11:29 PM	#5
Rob Dobbs EOC Rank: Carbon 2007 SC 2WD 5AT Nighthawk Black Pearl (NBP) Join Date: Oct 2010 Location: So Cal Posts: 1,086	Links to daylight pics. http://i50.tinypic.com/2z8ujpe.jpg http://i46.tinypic.com/wsn11j.jpg http://i50.tinypic.com/wqy6x4.jpg http://i47.tinypic.com/208v2h3.jpg http://i49.tinypic.com/dg6ofm.jpg http://i46.tinypic.com/dlhlps.jpg http://i47.tinypic.com/2yjo9li.jpg

03-14-2013, 07:48 PM	#6
Rob Dobbs EOC Rank: Carbon 2007 SC 2WD 5AT Nighthawk Black Pearl (NBP) Join Date: Oct 2010 Location: So Cal Posts: 1,086	still available.

Remove Advertisements Sponsored Links
Element Owners Club Advertisement