Honda Element Owners Club banner

1 - 7 of 7 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter #1
Well we got a Injen CAI the first part went ok... but when it came to the Cold Air pipe it wouldnt go throught the drivers fender like the kit is made for....

here are some pics...



 

·
Registered
Joined
·
109 Posts
Discussion Starter #4
Well, the battery doesn't help but the 2nd piece of the Cold Air didn't have the right bend to get into the fender well and there is a bracket that is in the way in the fender itself. But were still happy with the intake. There is a difference. But were going to make a different bend and try to bring it to the front instead of the fender. What you guys think?

PS= Sorry its been so long between post. Very very busy!
 

·
Registered
Joined
·
109 Posts
Discussion Starter #5
also we have a converter in the back for a OXYGEN UNIT for our mother. She is Oxygen Dependent so we have to have it everywhere and sometimes they go further then just to the doctor. We live in North GA and sometime we go all the way to Middle Ga, Asheville, NC or maybe even sooner to Miami in it. It was the only Battery that we found that could handle the pull of our oxygen machine and the car with AC well kinda messed up the First one because it wasn't powerful enough. Even tho it was a Red. But we might thing about about that one in the future. That would make a good gift. ;)

But the intakes bend isn't the right angle but maybe we'll make our own off of this one and sell one that will fit everyone SC ^_^.
 

·
Registered
Joined
·
1,220 Posts
Did you remove the front bumper for the install? You have to so you can put the pipe through the fender hole. Also, you have to take out the stock air box plate that I can see in your pictures. I just installed a injen on a 09 sc about a month ago for a customer and had no issues. Hope that helps.
Later
 
1 - 7 of 7 Posts
Top