Honda Element Owners Club banner

3.25" stainless exhaust

5331 Views 42 Replies 18 Participants Last post by  seanneyb
well here it is. It sounds amazing! You can hear the turbo spin at idle and can hear it spin up through the exhaust when you get on the gas.

I had to mod my existing downpipe to put the v-band flange on the back. It previously stepped down to 2.5 at the tail to a 2.5 exhaust.

The downpipe mod was easy, only in and out of the car 2 times, once for tacking the first peice then again for the v-band elbow section at the end. then I finish welded it and bolted it back in.
Next was the wastegate tube. It's tough to make a pipe that fits exactly between to immovable flanges. You kinda just have to work from both sides and pray they meet in the middle.

See less See more
1 - 1 of 43 Posts
1 - 1 of 43 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.