Honda Element Owners Club banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,202 Posts
Yea, it's basically a 'swap out' kinna job. But, (there's always a but isn't there?) why not test the fans just to make sure that's the problem...

Disconnect the two connectors, if you look straight into the connector with the 'tab' part to the top, connect ground to the pin on the left, and +12 volts to the pin on the right. If the fans don't run at full speed, then change 'em. If they do run fine, then you need to be looking somewhere else for the problem. ;-)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top