Honda Element Owners Club banner
1 - 1 of 1 Posts

· Registered
Joined
·
49 Posts
I really had to pry to get mine off. Under the radio is two small gaps, one on each side... just big enough to fit a small towel wrapped screw driver in. Just pry back and don't be afraid to use a little force. The top of the plate seems to give the most problem. I have to admit that even with the screwdriver being towel wrapped, the force necessary to pop the clips out ended up bruising my paneling. :evil:

Fortunately I saw a link to some oem parts in another thread. So when everything is said and done I'll probably replace the center trim, and radio plate.

Good luck! :?

OEM Parts: http://www.hondaautomotiveparts.com...tcgry5=INSTRUMENT+PANEL+GARNISH+(DRIVER+SIDE)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top