Honda Element Owners Club banner
1 - 3 of 3 Posts

· Registered
Joined
·
49 Posts
I replaced my tweaters this weekend with some polks. If you go out to element-j's website ( http://www.ecnet.net/users/gallery/element-j/ )
he has pictures and directions for getting to the tweaters. You should probably have a custom mount to replace the factory setup, but since I was lazy I just used duct tape to hold the tweater in place. Ended up cutting the oem wire between the tweater and the wire harness, and then soldered my new tweets to the remaining wire coming from the wire harness. Sorry I didn't take any pics, but it is doable and it sounds great!
 

· Registered
Joined
·
49 Posts
Nice job element-j 8)

Have to tell ya... your site has been a tremendous help and a great source for many of the same projects that I'm doing to my car.

Maybe this next weekend I'll take the duct tape off of mine and do it right like you did. :lol:
 

· Registered
Joined
·
49 Posts
jdef: It's gonna be really hard for me to give you a good response on this one. :? I replaced the radio, all four door speakers, and the tweets all at the same time. So, I have no way to give you any incremental feedback as to the value-addedness of just the tweets. If I were making a general recommendation for sound improvement it would be in the following order:

Front door speakers
Rear door speakers
Head Unit
Tweeters

By the way... the overall affect of all the new gear versus stock is quite impressive. 8)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top