Honda Element Owners Club banner
1 - 4 of 4 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Hello all,
I have a question for you guys.
I recently purchased some tein coilovers and installed them. however, I had an issue with istalling my rear camber kit. I bought the rear camber set used and I am not sure if they are supposed to come with a nut and bolt for each pair, or if I should just hack off the nut from the OEM camber set?
and Direction and advice would be greatly appreciated!
 

·
Registered
Joined
·
541 Posts
you reuse the bolt.they normally come with a nyloc nut since its not welded to the kit like stock.
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #3 ·
you reuse the bolt.they normally come with a nyloc nut since its not welded to the kit like stock.
what size nut should I get?
I would like to avoid a bunch of back and forth trips to mr home depot and his buddy lowes. haha =]
 

·
Registered
Joined
·
541 Posts
that im not sure on sorry.someone probably has a shop manual. or call honda and ask what size the bolt is
 
1 - 4 of 4 Posts
Top