Honda Element Owners Club banner

oil drain crush washers

2727 Views 5 Replies 5 Participants Last post by  ramblerdan
I bought some of these off ebay. 16¢ each. These should be enough to last me a while. I hope they are the right size for the E. (14mm)

1 - 6 of 6 Posts
great info but I dont need crush washers because I have a fram sure drain on the E! I was going to tell you guys you can get a quck drain just like the sure drain from harbor freight for $3.99 the only difference is it dosent come with a crush washer so you'll need one but it will last forever.


if you had a fumoto valve, you wouldn't need crush washers anymore. :)
See less See more
Does that valve lock? I would worry about it opening......if you hit something (roadkill, etc...)
Does that valve lock? I would worry about it opening......if you hit something (roadkill, etc...)
Search term "fumoto" returned this thread, stickeyed in the Accessories, Care and Mods > Under The Hood / Performance section. There are others as well. Safety and reliability of this valve and similar extensively discussed.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top