Honda Element Owners Club banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello, due to a stripped out lug bolt hole on the right rear hub, I am 'attempting' to remove the knuckle, so I can have the old hub pressed out. Then I will replace the bearing and the hub and put the sucker back together.

I have 1 bolt left to remove the knuckle, the bottom bolt that has the cam. I have the locking nut and adjusting cam off, but cannot get the adjusting bolt to bulge. Any ideas on how to get the bolt out would be appreciated.
 
1 - 1 of 1 Posts
Top