Honda Element Owners Club banner
Not open for further replies.
1 - 1 of 1 Posts

Premium Member
14,893 Posts
Discussion Starter · #1 · (Edited)
Designs whose pictures are lost (Ckole, Elementality, Kluffer, Mikesee) have been omitted. Links within categories are in chronological order.

Tailgate to front (over reclined front seats)

Shaped 2x4 and plywood with PVC legs (convertible, can be used with front seats upright), by BikeZen

Plywood and pine with pipe legs, by NismoGriff

1x2, plywood, table legs, and PVC by Inmyelemet

Modular, 3/4" plywood and 2x3s, finished with foam and custom cover, by Tseydel

2x4s, 3/4" plywood, and PVC (based on Bike Zen's) by E:ndiana

Plywood and steel pipe, by Dirkbeaulieu

2x4s, plywood, and PVC, by Vermonter

Modular, wood and PVC, by Tedsti

Tailgate to back of front seats

PVC pipe, by Pookster [plans]

2x4 and pine, by Will_morgan

Pine box frame and particleboard with metal crosspiece, by Gaily

Variation on Gaily's, with extension for open tailgate, by Ramblerdan

1x4 and plywood with PVC legs, by Twilightzero

1x4 and plywood with iron pipe legs, by Sarahp

Plywood with pipe legs, with extension over fully reclined rear seats, by TCW

2x2 and plywood, with commercial table for back end, by Jojo

2x4 and plywood with iron pipe legs, by Eventure

PVC frame and plywood, half- or full-width, by Strawintogold

PVC frame and plywood, variation on the PookSter platform, by Lefty

PVC frame by Nbpguy

PVC and plywood, by Zinguy

2x4, plywood, and steel pipe, shallow (8 1/2" rear, 11" front) to allow access to the rear side storage areas, by Soulcall

Pine board and plywood with iron pipe legs and hinged front section, by Sandiegotaylor

2x4s, 3/4" plywood, piano hinge and table legs, by Neilp

Steel cage, by Pokeyzilla

Bi-level, plywood and 2x6s, by Mikem

Wood box frame, with extensions, by Rodsnhawgs

Plywood, modular, by BlakeVW

3/4" plywood, modular (similar to BlakeVW's), by Bentanks

Wood slats, with some metal parts, by Nubsy1

Modular, plywood and 2x4, by Benlavallee

Longitudinally folding (half or full width) 2x4 and 1x4 pine, can be used outside the vehicle as a bench, by Plankwalk

Metal drawer baskets and plywood, by Elefante

Cot-style, folding, wood, by Nightrider

Wood with pipe legs, folds for storage or transport, by Twitchy411

Plywood, 2x4s and PVC, by Treybrad

All-plywood with piano hinges and drawers, by CosmoSwiller [external site]

Aluminum square tube and Hurriguard-brand plastic panels, by Hot_Karl

Plywood, modular, by Hotelement

Wood, incorporates spare tire well, by Lambertdarr2 (view pictures in reverse order)

Plywood and steel legs, with front extension, by Spikeselby

Tailgate to back of front seats, modular/convertible

1x3 and 2x2 wood, by CerealBox

PVC and cedar slats, by Ray Al

Plywood, by Night Hawk E Camper

Wood slats and PVC legs, based on CerealBox's design, by BPD

Half width, with extension to dashboard on passenger's side

1x4 and plywood with iron pipe legs, by Roadtriperic

1x3 and plywood, by MMs2011E (with video and link to external PDFs)

Half width, tailgate to back of front seat, modular/convertible

Hollow-core door with PVC legs, by Arm2008

Aluminum and wood, mounted to exposed rear-seat frame, by Ray Al

Tailgate to top of reclined front-seat backs

1x4, pine, and angle iron, by Paulj

1x4 and plywood with iron pipe legs, by TheTimeTravelers

1x4 and plywood with iron pipe legs, by Rishio

Variation on Rishio's, with extension for open tailgate, by AppleAficionado

Plywood and metal angle with Ikea legs, by Goofcat

Plywood with metal angle, by Flyazureair

Plywood with PVC legs, by Mehlhorn

Pine board with PVC legs, by Staisey

Plywood and PVC, modular (platform or just a shelf behind the rear seats), by BreE

Particleboard and PVC (longitudinally folding), by D.Cool

Wood and aluminum pipe, by Kcousins

Plywood & PVC, modular, by Jazz82482

Plywood with PVC legs and wood frame, carpeted, by M Silver [external link]

3/4-depth structure, laterally and longitudinally folding

PVC and plywood, by Dangerjack

Shelf/half platform combo

Plywood and rear seat bases, by MTBecamper77 (external link)

Corrections or amendations: PM Ramblerdan

1 - 1 of 1 Posts
Not open for further replies.