Good Evening Ladies and Gentlemen. As the title suggests, I have an unusual issue with my power window that I just cant figure out. Well, it all started when my passenger side window started rolling up but not down. After running through all the forums here and trying all the things in the service manual, I concluded that the drivers side control switch was bad. I ordered a new one, replaced it, did the thing to reset the auto position, and the pax window now works perfectly. HOWEVER, the driver side window does this odd thing where it will auto down, but then when you go to auto up it will go about half way, stop and go back to the bottom, start back up again, stop somewhere in the middle again then go back to the bottom and stop. If you have the window somewhere in the middle and go to auto it up, it first will run all the way to the bottom then go up. I have NO clue what could be causing this. If I pull the switch to the first position (the NON auto) it will roll all the way up every time, no problem. And it DOESN'T always do it. sometimes it works as it should.... At first I thought that maybe I'd gotten a defective switch, so I ordered another one, and it does the exact same thing. It doesn't seem to be binding up on anything while its moving or anything like that... I am totally lost. I posted a video of this on youtube and below is the link. If that isn't allowed let me know.
Thanks in advance for reading through this and for any help you can offer.
Thanks in advance for reading through this and for any help you can offer.